If you need to reset your Compal CH7465LG-VM router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Compal CH7465LG-VM Guides
This is the reset router guide for the Compal CH7465LG-VM NCIP-6.12.18.26-3p7-1-NOSH Virgin Media. We also have the following guides for the same router:
Recover Password in Compal CH7465LG-VM
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Compal CH7465LG-VM
Most routers have a small button on either the back or the bottom. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your Compal CH7465LG-VM router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Compal CH7465LG-VM
Once the reset is complete, you need to login to your router using the default IP address, username, and password. Just follow our CH7465LG-VM Login Guide to find all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Compal CH7465LG-VM Guides
This isn't our only Compal CH7465LG-VM guide. We also have the following guides for this router.
This is the reset router guide for the Compal CH7465LG-VM NCIP-6.12.18.26-3p7-1-NOSH Virgin Media. We also have the following guides for the same router: