Conceptronic C300BRS4 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Conceptronic C300BRS4 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Conceptronic C300BRS4 Guides

This is the port forwarding guide for the Conceptronic C300BRS4.We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Conceptronic C300BRS4 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Conceptronic C300BRS4

To get started forwarding a port you need to login to your Conceptronic C300BRS4 router. If you are already logged in you can skip this step.

To login to the Conceptronic C300BRS4, follow our Conceptronic C300BRS4 Login Guide.

Forward a Port on the Conceptronic C300BRS4 router

Find The Port Forwarding Section of the Conceptronic C300BRS4

router status mac address internet IP
This is the status page from your Conceptronic router.

You begin on the Device Settings page of the Conceptronic C300BRS4 router. To forward a port, click the Advanced option at the top of the page.

Now, looking to the left side of the page, click Virtual Server.

Configure the Port Forwarding section of your Conceptronic C300BRS4

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Conceptronic router.

Now you should be on the proper page to forward a port.

First, place a dot in the Enabled radio button, next to Virtual Server.

Second is the Name box. Type in the name of the program you are forwarding this port for. It doesn't really matter what you enter here. This is for your future reference.

Next is the Private IP Address. Every computer on your network has it's own LAN IP address, for identification. Enter the LAN IP address of the specific computer you are forwarding this port to.

Below that is the Protocol drop down menu. Select the type of protocol you need to forward this port.

Enter the port number you are forwarding in the boxes labeled Private Port, and Public Port.

Select Always from the Schedule drop down menu.

That's all there is to it, simply click the green Apply button in the lower right corner of the page when you are done.

Congratulations!

Test if Your Ports are Open

Now that you have forwarded ports on the Conceptronic C300BRS4 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Conceptronic C300BRS4 Info

Don't forget about our other Conceptronic C300BRS4 info that you might be interested in.

This is the port forwarding guide for the Conceptronic C300BRS4.We also have the following guides for the same router: