This page shows how to change the LAN IP Address on the Cyberoam NetGenie router.
Other Cyberoam NetGenie Guides
This is the ip address guide for the Cyberoam NetGenie. We also have the following guides for the same router:
- Cyberoam NetGenie - Cyberoam NetGenie Login Instructions
- Cyberoam NetGenie - Cyberoam NetGenie User Manual
- Cyberoam NetGenie - Cyberoam NetGenie Port Forwarding Instructions
- Cyberoam NetGenie - How to change the DNS settings on a Cyberoam NetGenie router
- Cyberoam NetGenie - Setup WiFi on the Cyberoam NetGenie
- Cyberoam NetGenie - How to Reset the Cyberoam NetGenie
- Cyberoam NetGenie - Information About the Cyberoam NetGenie Router
- Cyberoam NetGenie - Cyberoam NetGenie Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Cyberoam NetGenie
To get started configuring the Cyberoam NetGenie LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Cyberoam NetGenie, follow our Cyberoam NetGenie Login Guide.
Change the LAN IP Address on a Cyberoam NetGenie
If you followed our login guide above then you should see this screen.

When you have finished logging into the Cyberoam NetGenie you see the System Overview page. When you want to change your IP Address, the address you see while inside your network, click the tab at the top labeled Network Settings. Next, some choices will appear on the left side of the screen, click the one labeled Local Network.
Configure the LAN section of your Cyberoam NetGenie

Now on the right page, find the box labeled IP Address and enter the new address you have chosen for your Router. We suggest using the address of 192.168.0.1
Make sure that you do not change the Subnet Mask, this should be kept at 255.255.255.0
Click Apply when you are done.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Cyberoam NetGenie Info
Don't forget about our other Cyberoam NetGenie info that you might be interested in.
This is the ip address guide for the Cyberoam NetGenie. We also have the following guides for the same router:
- Cyberoam NetGenie - Cyberoam NetGenie Login Instructions
- Cyberoam NetGenie - Cyberoam NetGenie User Manual
- Cyberoam NetGenie - Cyberoam NetGenie Port Forwarding Instructions
- Cyberoam NetGenie - How to change the DNS settings on a Cyberoam NetGenie router
- Cyberoam NetGenie - Setup WiFi on the Cyberoam NetGenie
- Cyberoam NetGenie - How to Reset the Cyberoam NetGenie
- Cyberoam NetGenie - Information About the Cyberoam NetGenie Router
- Cyberoam NetGenie - Cyberoam NetGenie Screenshots