This guide shows you how to reset your Digicom DG-5314T router to factory default settings. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Digicom DG-5314T Guides
This is the reset router guide for the Digicom DG-5314T. We also have the following guides for the same router:
Recover Password in Digicom DG-5314T
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Digicom DG-5314T
There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.
Remember, this will erase everything you have previously done to this Digicom DG-5314T router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Digicom DG-5314T
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our DG-5314T Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Digicom DG-5314T Guides
We have collected a lot of information about the Digicom DG-5314T router. You can find some of our additional content here.
This is the reset router guide for the Digicom DG-5314T. We also have the following guides for the same router: