This guide shows you how to reset your Digicom RAW300C-T03 router. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's username and password are reset.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Digicom RAW300C-T03 Guides
This is the reset router guide for the Digicom RAW300C-T03. We also have the following guides for the same router:
Recover Password in Digicom RAW300C-T03
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Digicom RAW300C-T03
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.
Remember, this will totally reset your Digicom RAW300C-T03 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Digicom RAW300C-T03
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the RAW300C-T03 Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Digicom RAW300C-T03 Guides
If you want additional help with your Digicom RAW300C-T03 be sure to check out some of our other guides.
This is the reset router guide for the Digicom RAW300C-T03. We also have the following guides for the same router: