Setup Router logo in white Setup router name logo in white
Get Software

Reset the Digisol DG-HR3400

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the Digisol DG-HR3400 router back to factory default settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.

Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Digisol DG-HR3400 Guides

This is the reset router guide for the Digisol DG-HR3400 2.00.00. We also have the following guides for the same router:

Recover Password in Digisol DG-HR3400

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

A router reset should be the last thing you try if you are unable to login.

Reset the Digisol DG-HR3400

On most routers you can find a small button on the back or the bottom labeled reset. What you are looking for is something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will erase everything you have previously done to this Digisol DG-HR3400 router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Digisol DG-HR3400

Once the reset is complete, you need to login to your router using the default IP address, username, and password. Our DG-HR3400 Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other Digisol DG-HR3400 Guides

If you want additional help with your Digisol DG-HR3400 be sure to check out some of our other guides.

This is the reset router guide for the Digisol DG-HR3400 2.00.00. We also have the following guides for the same router: