How to change the IP Address on a Dlink DES-1226G router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink DES-1226G router.

Other Dlink DES-1226G Guides

This is the ip address guide for the Dlink DES-1226G. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink DES-1226G

To get started configuring the Dlink DES-1226G LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DES-1226G, follow our Dlink DES-1226G Login Guide.

Change the LAN IP Address on a Dlink DES-1226G

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Dlink DES-1226G router.

After logging into the Dlink DES-1226G you see the Status page. To change your IP Address, or the address you are looking at while inside your network, click the choice on the left labeled System.

Configure the LAN section of your Dlink DES-1226G

router setup
This is the setup page from your Dlink DES-1226G router.

This should take you to the System Setting page. From here, click the box labeled IP Address and enter the new address you have chosen for your Router. Our suggestion for an IP Address is 192.168.0.1

Do not change the Subnet Mask, this needs to stay at 255.255.255.0

For these changes to take effect, you must save it, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink DES-1226G Info

Don't forget about our other Dlink DES-1226G info that you might be interested in.

This is the ip address guide for the Dlink DES-1226G. We also have the following guides for the same router: