Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Dlink DI-714P+

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page we show you how to reset the Dlink DI-714P+ router back to the original factory defaults. This is not the same thing as a reboot. When you reboot your router you end up cycling the power to the device. When you reset a router you take all the settings and return every single one of them back to factory defaults.

Warning: Resetting this router can cause additional problems if you don't know which settings are changed and what ones are not. Take the following list into consideration before you reset this device:

  • The router's main setup username and password are reverted to factory defaults.
  • The Internet name and password are also reverted to factory settings.
  • If you use a DSL connection you need to re-enter the ISP (Internet Service Provider) username and password. Call your local ISP for the details.
  • Have you made any other changes to this router? If so write them down so you can reconfigure them after the reset is complete.

Other Dlink DI-714P+ Guides

This is the reset router guide for the Dlink DI-714P+. We also have the following guides for the same router:

Reset the Dlink DI-714P+

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

The first step in resetting the Dlink DI-714P+ router is to locate the reset button. Flip the router over so you are looking at the back panel of the device. The reset button should be located on the far left side of the device. Take a look at the image below.

router reset factory settings
This is the reset page from your Dlink DI-714P+ router.

Next take the end of a paperclip and press down on the reset button for about 10 seconds. Make sure you hold the reset button down for the entire amount of time. If you don't you may end up only rebooting the router instead of resetting it like you wanted.

Remember this reset will erase every setting you have ever changed. If you want to try and avoid this you need to exhaust your other troubleshooting ideas first.

Login to the Dlink DI-714P+

After resetting the Dlink DI-714P+ router you should log into it. This is done by using the factory default username and password. These are provided for you in our Login Guide.

Tip: If the defaults don't seem to be logging you in it could be because the reset button wasn't held down for long enough.

Change Your Password

Now that you've logged into your router we recommend setting a new password for it. This can be whatever you want it to be, however remember that a strong password consists of 14-20 characters and includes no personal information. For more help be sure to visit our Choosing a Strong Password Guide.

Tip: Prevent yourself from losing your new password by writing it on a sticky note and attaching it to the bottom of your router.

Setup WiFi on the Dlink DI-714P+

It's time to check on the wireless settings. This should include the SSID, the security type, and the Internet password. We recommend using WPA2 as your security with a good strong password. Consider looking at our guide titled How to Setup WiFi on the Dlink DI-714P+ for more details.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Dlink DI-714P+ Help

Be sure to check out our other Dlink DI-714P+ info that you might be interested in.

This is the reset router guide for the Dlink DI-714P+. We also have the following guides for the same router: