How to change the IP Address on a Dlink DI-LB604 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink DI-LB604 router.

Other Dlink DI-LB604 Guides

This is the ip address guide for the Dlink DI-LB604.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink DI-LB604

To get started configuring the Dlink DI-LB604 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DI-LB604, follow our Dlink DI-LB604 Login Guide.

Change the LAN IP Address on a Dlink DI-LB604

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Dlink router.

Once you have successfully logged into the Dlink DI-LB604 you see the Setup Wizard page. When changing your IP Address click the blue box on the left side of the screen labeled LAN.

Configure the LAN section of your Dlink DI-LB604

router setup
This is the setup page from your Dlink router.

This takes you to a new page where you should place your cursor in the box labeled IP Address and enter the new one you have chosen for your Router. We recommend using the number they have used in this screenshot, 192.168.0.1

Before clicking Apply to save your settings, make sure you have not changed the Subnet Mask, which should remain at 255.255.255.0

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink DI-LB604 Info

Don't forget about our other Dlink DI-LB604 info that you might be interested in.

This is the ip address guide for the Dlink DI-LB604.We also have the following guides for the same router: