This guide shows you how to reset your Dlink DIR-825M router to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:
- The router's login and password are reset.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Dlink DIR-825M Guides
This is the reset router guide for the Dlink DIR-825M v1.1.8. We also have the following guides for the same router:
Recover Password in Dlink DIR-825M
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Dlink DIR-825M
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.
Don't forget, this step will totally reset your Dlink DIR-825M router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Dlink DIR-825M
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our DIR-825M Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Dlink DIR-825M Guides
We have collected a lot of information about the Dlink DIR-825M router. You can find some of our additional content here.
This is the reset router guide for the Dlink DIR-825M v1.1.8. We also have the following guides for the same router: