Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Dlink DNS-323-1TB

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will be explaining how to reset the Dlink DNS-323-1TB if you cannot access the interface of the device. What you are going to be doing is not a reboot which is simply cycling the power. You are going to be doing a reset which is taking all the settings inside of the interface and erasing them all reverting them to factory defaults.

Warning: Resetting this unit is a big step and should not be taken lightly. We recommend making a list of the settings that need to be reconfigured after the reset is complete. Consider the following:

  • The unit's main username and password used to access the user interface is erased and put back to how they were from the factory.
  • If you have ever setup a FTP in the unit or changed the network access settings you need to reconfigure them after the reset is complete.

According to the manual the hard drives will not be affected by this reset. If you are worried about it you should definitely remove any hard drives before continuing.

Other Dlink DNS-323-1TB Guides

This is the reset router guide for the Dlink DNS-323-1TB. We also have the following guides for the same router:

Reset the Dlink DNS-323-1TB

Begin by finding the reset button on the back of the device. Just take a look at the image below for it's exact location.

router reset factory settings
This is the reset page from your Dlink DNS-323-1TB router.

Take a straightened paperclip and press down on the reset button until the front display lights begin to flash. This should take about 10 seconds. If you don't hold this button down for long enough you only reboot the unit instead of resetting it.

Don't forget that this erases every setting you have ever changed on this device. To avoid this loss we recommend trying other methods of troubleshooting before continuing.

Login to the Dlink DNS-323-1TB

Now that you've reset your Dlink DNS-323-1TB you should log into it. This is done by using the default username and password. If you're not sure where to get these, don't worry. We have them listed for you in our Login Guide.

Tip: If the defaults aren't working for you it may be because the reset button wasn't held for long enough.

Change Your Password

After you've reset and logged into your network storage enclosure we suggest setting a new password for it. Keep in mind that a strong password consists of 14-20 characters and includes no personal information. For more helpful hints be sure to visit our Choosing a Strong Password Guide.

Tip: To keep from losing your new password try writing it on a sticky note and attaching it to the underside of the unit.

Dlink DNS-323-1TB Help

Be sure to check out our other Dlink DNS-323-1TB info that you might be interested in.

This is the reset router guide for the Dlink DNS-323-1TB. We also have the following guides for the same router: