This page shows how to change the LAN IP Address on the Dlink DSL-2680 router.
Other Dlink DSL-2680 Guides
This is the ip address guide for the Dlink DSL-2680. We also have the following guides for the same router:
- Dlink DSL-2680 - Dlink DSL-2680 Login Instructions
- Dlink DSL-2680 - Dlink DSL-2680 User Manual
- Dlink DSL-2680 - Dlink DSL-2680 Port Forwarding Instructions
- Dlink DSL-2680 - How to change the DNS settings on a Dlink DSL-2680 router
- Dlink DSL-2680 - Setup WiFi on the Dlink DSL-2680
- Dlink DSL-2680 - How to Reset the Dlink DSL-2680
- Dlink DSL-2680 - Dlink DSL-2680 Screenshots
- Dlink DSL-2680 - Information About the Dlink DSL-2680 Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Dlink DSL-2680
To get started configuring the Dlink DSL-2680 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Dlink DSL-2680, follow our Dlink DSL-2680 Login Guide.
Change the LAN IP Address on a Dlink DSL-2680
If you followed our login guide above then you should see this screen.

Once you have logged into the Dlink DSL-2680 you should begin on the Status page. When changing your IP Address, the address you are looking at while inside the network, click the blue box on the top labeled Setup, then LAN Setup on the left side bar.
Configure the LAN section of your Dlink DSL-2680

Once on the LAN Setup page, find the box labeled Router IP Address and enter the address of choice here. In this screenshot, someone has used the IP Address 192.168.1.1, this is a strong choice.
Don't change the Subnet Mask, it needs to stay 255.255.255.0 at all times.
When you are finished click Save Settings.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Dlink DSL-2680 Info
Don't forget about our other Dlink DSL-2680 info that you might be interested in.
This is the ip address guide for the Dlink DSL-2680. We also have the following guides for the same router:
- Dlink DSL-2680 - Dlink DSL-2680 Login Instructions
- Dlink DSL-2680 - Dlink DSL-2680 User Manual
- Dlink DSL-2680 - Dlink DSL-2680 Port Forwarding Instructions
- Dlink DSL-2680 - How to change the DNS settings on a Dlink DSL-2680 router
- Dlink DSL-2680 - Setup WiFi on the Dlink DSL-2680
- Dlink DSL-2680 - How to Reset the Dlink DSL-2680
- Dlink DSL-2680 - Dlink DSL-2680 Screenshots
- Dlink DSL-2680 - Information About the Dlink DSL-2680 Router