Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Dlink DSL-2750B Verizon router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink DSL-2750B Verizon router.

Other Dlink DSL-2750B Verizon Guides

This is the ip address guide for the Dlink DSL-2750B Verizon 5.4.12.1.44.2.1. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink DSL-2750B Verizon

To get started configuring the Dlink DSL-2750B Verizon LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DSL-2750B Verizon, follow our Dlink DSL-2750B Verizon Login Guide.

Change the LAN IP Address on a Dlink DSL-2750B Verizon

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the home page from your Dlink DSL-2750B Verizon router.

Now that you have logged into the Dlink DSL-2750B Verizon router you should see the home page above.

To change the router's IP address click the option at the top of the page labeled My Network. Under that there is a tiny little line of options. Click LAN. Then below click the tab labeled Settings.

Configure the LAN section of your Dlink DSL-2750B Verizon

router IP address lan home network
This is the lan page from your Dlink DSL-2750B Verizon router.

You are then directed to the page above. The only setting you change is the one titled IP Address in the box labeled Internet Protocol.

Go ahead and enter the new address you want to use for your router here. To make this address easier to remember end it in a one like 10.0.0.1

Don't make any other changes to this page. Simply click the Apply button at the bottom of the page when you are finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink DSL-2750B Verizon Info

Don't forget about our other Dlink DSL-2750B Verizon info that you might be interested in.

This is the ip address guide for the Dlink DSL-2750B Verizon 5.4.12.1.44.2.1. We also have the following guides for the same router: