If you need to reset your Dlink DSL-G225 router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Dlink DSL-G225 Guides
This is the reset router guide for the Dlink DSL-G225 AF_3.09_T15. We also have the following guides for the same router:
Recover Password in Dlink DSL-G225
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Dlink DSL-G225
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your Dlink DSL-G225 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Dlink DSL-G225
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Our DSL-G225 Login Guide has all of the information that you need.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Dlink DSL-G225 Guides
Here are some of our other Dlink DSL-G225 guides that you might be interested in.
This is the reset router guide for the Dlink DSL-G225 AF_3.09_T15. We also have the following guides for the same router: