This article covers how to reset the Dlink DSL-G2452GE router back to factory default settings. A router reset is very different than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Dlink DSL-G2452GE Guides
This is the reset router guide for the Dlink DSL-G2452GE STC_1.07b02. We also have the following guides for the same router:
Recover Password in Dlink DSL-G2452GE
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Dlink DSL-G2452GE
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Just don't forget that this will totally reset your Dlink DSL-G2452GE router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Dlink DSL-G2452GE
After you are finished resetting your router, you need to login in using the original factory username and password. Just follow our DSL-G2452GE Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Dlink DSL-G2452GE Guides
This isn't our only Dlink DSL-G2452GE guide. We also have the following guides for this router.
This is the reset router guide for the Dlink DSL-G2452GE STC_1.07b02. We also have the following guides for the same router: