This guide shows you how to reset your Dlink DWR-932 router. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Dlink DWR-932 Guides
This is the reset router guide for the Dlink DWR-932 01.07.EU (IT). We also have the following guides for the same router:
Recover Password in Dlink DWR-932
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Dlink DWR-932
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.
Keep in mind that this will completely reset your Dlink DWR-932 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Dlink DWR-932
Now you need to log in using the factory default username and password. You can find all of the information that you need in our DWR-932 Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Dlink DWR-932 Guides
This isn't our only Dlink DWR-932 guide. We also have the following guides for this router.
This is the reset router guide for the Dlink DWR-932 01.07.EU (IT). We also have the following guides for the same router: