E-Tech Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
March 09, 2020 (Last Updated: ) | Reading Time: 1 minutes

We have 9 E-Tech models in our database, including the ADRT02, ADRT03, ADWG03 and ATBR03. Most of them use 192.168.1.1 as the default IP address, and the default login is blank / Admin. This page has the default IP address and login for each model we know of.

How to Log In to an E-Tech Router

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://192.168.1.1 into your browser's address bar. If nothing loads, try the other addresses in the table below.
  3. Sign in with the default username and password from the table below (blank / Admin is the most common).

Default E-Tech IP Addresses

E-Tech Model IP Address
ADRT02 10.0.0.2
ADRT03 10.0.0.2
ADWG03 192.168.1.1
ATBR03 192.168.1.1
RTBR03 192.168.1.1
RTBR05 192.168.1.1
RTVP03 192.168.2.1
WGRT04 192.168.1.1
WLRT03 192.168.1.1

Default E-Tech Username and Password

E-Tech Model Username Password
ADRT02 admin epicrouter
ATBR03 admin admin
RTBR03 blank admin
RTBR05 blank blank
WGRT04 admin admin
WLRT03 blank admin

Other logins we have seen on E-Tech models: admin / admin, blank / admin.

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on an E-Tech router, see our sister site: E-Tech port forwarding guides on Portforward.com.

E-Tech Models We Cover

ADRT02, ADRT03, ADWG03, ATBR03, RTBR03, RTBR05, RTVP03, WGRT04, WLRT03