Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Edimax AR-7284WnA router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Edimax AR-7284WnA router.

Other Edimax AR-7284WnA Guides

This is the ip address guide for the Edimax AR-7284WnA. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Edimax AR-7284WnA

To get started configuring the Edimax AR-7284WnA LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Edimax AR-7284WnA, follow our Edimax AR-7284WnA Login Guide.

Change the LAN IP Address on a Edimax AR-7284WnA

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Edimax AR-7284WnA router.

After you have logged into the Edimax AR-7284WnA you see the Device Info page. To change your IP Address, the address you can see while inside the network, click the red tab at the top labeled Setup. Next, on the left choose Local Network.

Configure the LAN section of your Edimax AR-7284WnA

router setup
This is the setup page from your Edimax AR-7284WnA router.

When this new page comes up, find the box marked Router IP Address and enter the new address you have picked for your Router. We highly recommend the use of 192.168.0.1 as your new IP Address.

Make sure to leave the Subnet Mask at 255.255.255.0

Don't forget to save your changes, before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Edimax AR-7284WnA Info

Don't forget about our other Edimax AR-7284WnA info that you might be interested in.

This is the ip address guide for the Edimax AR-7284WnA. We also have the following guides for the same router: