In this article, you will learn how to reset your Fiber Home HG6245N back to factory settings. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login and password are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Fiber Home HG6245N Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Fiber Home HG6245N RP2824 3BB. We also have the following guides for the same router:
Recover Password in Fiber Home HG6245N
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Fiber Home HG6245N
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will totally reset your Fiber Home HG6245N router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Fiber Home HG6245N
After you are finished resetting your router, you need to login in using the original factory username and password. You can find all of the information that you need in our HG6245N Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Fiber Home HG6245N Guides
This isn't our only Fiber Home HG6245N guide. We also have the following guides for this router.
This is the reset router guide for the Fiber Home HG6245N RP2824 3BB. We also have the following guides for the same router: