This guide shows you how to reset your FiberHome HG180 router to factory default settings. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login credentials are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other FiberHome HG180 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the FiberHome HG180 v08H1.03 Globe. We also have the following guides for the same router:
Recover Password in FiberHome HG180
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the FiberHome HG180
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this FiberHome HG180 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the FiberHome HG180
Now you need to log in using the factory default username and password. You can follow the HG180 Login Guide to find everything that you need to log in.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other FiberHome HG180 Guides
Here are some of our other FiberHome HG180 guides that you might be interested in.
This is the reset router guide for the FiberHome HG180 v08H1.03 Globe. We also have the following guides for the same router: