This guide shows you how to reset your Franklin Wireless R910 router to factory default settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Franklin Wireless R910 Guides
This is the reset router guide for the Franklin Wireless R910 R910F31FR.M1630 Sprint. We also have the following guides for the same router:
Recover Password in Franklin Wireless R910
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Franklin Wireless R910
There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.
Just don't forget that this will totally reset your Franklin Wireless R910 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Franklin Wireless R910
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the R910 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Franklin Wireless R910 Guides
We have collected a lot of information about the Franklin Wireless R910 router. You can find some of our additional content here.
This is the reset router guide for the Franklin Wireless R910 R910F31FR.M1630 Sprint. We also have the following guides for the same router: