This article covers how to reset the Green Packet DX-230 router back to factory default settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Green Packet DX-230 Guides
This is the reset router guide for the Green Packet DX-230. We also have the following guides for the same router:
Recover Password in Green Packet DX-230
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Green Packet DX-230
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not worry about holding the button down too long; this is harmless.
Remember, this will totally reset your Green Packet DX-230 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Green Packet DX-230
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. We have a DX-230 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Green Packet DX-230 Guides
This isn't our only Green Packet DX-230 guide. We also have the following guides for this router.
This is the reset router guide for the Green Packet DX-230. We also have the following guides for the same router: