Reset the GX Group Titanium 2022

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your GX Group Titanium 2022 router. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • Your ISP username and password will be reset, and you may have to contact your ISP.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other GX Group Titanium 2022 Guides

This is the reset router guide for the GX Group Titanium 2022 T2022-V1.1A Airtel. We also have the following guides for the same router:

Recover Password in GX Group Titanium 2022

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Lost or Forgotten Router Password Recovery Tool

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the GX Group Titanium 2022

Most of the time you can find a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.

Watch the front panel lights while you hold the reset button down for at least 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will totally reset your GX Group Titanium 2022 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the GX Group Titanium 2022

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the Titanium 2022 Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other GX Group Titanium 2022 Guides

We have collected a lot of information about the GX Group Titanium 2022 router. You can find some of our additional content here.

This is the reset router guide for the GX Group Titanium 2022 T2022-V1.1A Airtel. We also have the following guides for the same router: