In this article, you will learn how to reset your Hitron Technologies CGNVM-3582 back to factory settings. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Hitron Technologies CGNVM-3582 Guides
This is the reset router guide for the Hitron Technologies CGNVM-3582 4.5.11.34. We also have the following guides for the same router:
Recover Password in Hitron Technologies CGNVM-3582
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Hitron Technologies CGNVM-3582
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will totally reset your Hitron Technologies CGNVM-3582 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Hitron Technologies CGNVM-3582
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a CGNVM-3582 Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. The factory default passwords for routers are very well known. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Hitron Technologies CGNVM-3582 Guides
If you want additional help with your Hitron Technologies CGNVM-3582 be sure to check out some of our other guides.
This is the reset router guide for the Hitron Technologies CGNVM-3582 4.5.11.34. We also have the following guides for the same router: