This is the reset guide for the Hitron Technologies CODA-4582-RES (2A) router. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. When you reset your router, the following will happen.
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Hitron Technologies CODA-4582-RES (2A) Guides
This is the reset router guide for the Hitron Technologies CODA-4582-RES (2A) 7.2.4.5.2b5. We also have the following guides for the same router:
Recover Password in Hitron Technologies CODA-4582-RES (2A)
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Hitron Technologies CODA-4582-RES (2A)
You can usually find a small reset button on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will totally reset your Hitron Technologies CODA-4582-RES (2A) router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Hitron Technologies CODA-4582-RES (2A)
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a CODA-4582-RES (2A) Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Hitron Technologies CODA-4582-RES (2A) Guides
Here are some of our other Hitron Technologies CODA-4582-RES (2A) guides that you might be interested in.
This is the reset router guide for the Hitron Technologies CODA-4582-RES (2A) 7.2.4.5.2b5. We also have the following guides for the same router: