This guide shows you how to reset your Hitron Technologies CODA-4582U (2A) router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you continue, there are a few things you need to know. The following settings in your router will be changed:
- The router's login and password are reset.
- Your WiFi name and password are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Hitron Technologies CODA-4582U (2A) Guides
This is the reset router guide for the Hitron Technologies CODA-4582U (2A) 7.1.1.32. We also have the following guides for the same router:
Recover Password in Hitron Technologies CODA-4582U (2A)
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Hitron Technologies CODA-4582U (2A)
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Don't forget, this step will totally reset your Hitron Technologies CODA-4582U (2A) router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Hitron Technologies CODA-4582U (2A)
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our CODA-4582U (2A) Login Guide to find all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Hitron Technologies CODA-4582U (2A) Guides
If you want additional help with your Hitron Technologies CODA-4582U (2A) be sure to check out some of our other guides.
This is the reset router guide for the Hitron Technologies CODA-4582U (2A) 7.1.1.32. We also have the following guides for the same router: