This article covers how to reset the Huawei B2338-168 router back to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's username and password are reset.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei B2338-168 Guides
This is the reset router guide for the Huawei B2338-168 V100R001C00SPC198 Play. We also have the following guides for the same router:
Recover Password in Huawei B2338-168
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Huawei B2338-168
On most routers you can find a small button on the back or the bottom labeled reset. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. It is harmless to hold the reset button too long.
Remember, this will totally reset your Huawei B2338-168 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Huawei B2338-168
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our B2338-168 Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Huawei B2338-168 Guides
This isn't our only Huawei B2338-168 guide. We also have the following guides for this router.
This is the reset router guide for the Huawei B2338-168 V100R001C00SPC198 Play. We also have the following guides for the same router: