This article covers how to reset the Huawei DG8245V router back to factory default settings. A router reset is a much bigger deal than a router reboot. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Huawei DG8245V Guides
This is the reset router guide for the Huawei DG8245V Omantel. We also have the following guides for the same router:
Recover Password in Huawei DG8245V
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Huawei DG8245V
There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Just don't forget that this will totally reset your Huawei DG8245V router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Huawei DG8245V
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our DG8245V Login Guide to find all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Huawei DG8245V Guides
Here are some of our other Huawei DG8245V guides that you might be interested in.
This is the reset router guide for the Huawei DG8245V Omantel. We also have the following guides for the same router: