This article covers how to reset the Huawei E5186s-a router back to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. This is different from a reset because a reset completely erases all settings from the router.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei E5186s-a Guides
This is the reset router guide for the Huawei E5186s-a 21. We also have the following guides for the same router:
Recover Password in Huawei E5186s-a
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Huawei E5186s-a
Most routers have a small button on either the back or the bottom. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. It is harmless to hold the reset button too long.
Don't forget, this step will totally reset your Huawei E5186s-a router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Huawei E5186s-a
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our E5186s-a Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Huawei E5186s-a Guides
We have collected a lot of information about the Huawei E5186s-a router. You can find some of our additional content here.
This is the reset router guide for the Huawei E5186s-a 21. We also have the following guides for the same router: