If you need to reset your Huawei HG8045H 3BB router back to factory settings, then this article shows you how. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. A Router Reset completely erases the router and returns it to factory settings.
Warning: Before you proceed, there are a few things you need to know. When you reset your router, the following will happen.
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei HG8045H 3BB Guides
This is the reset router guide for the Huawei HG8045H 3BB. We also have the following guides for the same router:
Recover Password in Huawei HG8045H 3BB
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Huawei HG8045H 3BB
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Reset buttons are usually tiny. Yours may look slightly different than this. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Don't forget, this step will totally reset your Huawei HG8045H 3BB router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Huawei HG8045H 3BB
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our HG8045H 3BB Login Guide.
Change Your Password
After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Huawei HG8045H 3BB Guides
Here are some of our other Huawei HG8045H 3BB guides that you might be interested in.
This is the reset router guide for the Huawei HG8045H 3BB. We also have the following guides for the same router: