This is the reset guide for the Ignition Design Labs Portal router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Ignition Design Labs Portal Guides
This is the reset router guide for the Ignition Design Labs Portal v1. We also have the following guides for the same router:
Recover Password in Ignition Design Labs Portal
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Ignition Design Labs Portal
Most of the time you can find a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Ignition Design Labs Portal router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Ignition Design Labs Portal
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Just follow our Portal Login Guide to find all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Ignition Design Labs Portal Guides
This isn't our only Ignition Design Labs Portal guide. We also have the following guides for this router.
This is the reset router guide for the Ignition Design Labs Portal v1. We also have the following guides for the same router: