Innacomm Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
March 09, 2020 (Last Updated: ) | Reading Time: 1 minutes

We have 2 Innacomm models in our database: the ADSL-MARITIME-W3400V6 and RG4332. Most of them use 192.168.0.1 as the default IP address, and the default login is admin / blank. This page has the default IP address and login for each model we know of.

How to Log In to an Innacomm Router

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://192.168.0.1 into your browser's address bar. If nothing loads, try the other addresses in the table below.
  3. Sign in with the default username and password from the table below (admin / blank is the most common).

Default Innacomm IP Addresses

Innacomm Model IP Address
ADSL-MARITIME-W3400V6 192.168.1.1
RG4332 192.168.0.1

Default Innacomm Username and Password

Innacomm Model Username Password
ADSL-MARITIME-W3400V6 tmadmin tmadmin
RG4332 admin blank

Other logins we have seen on Innacomm models: tmadmin / tmadmin.

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on an Innacomm router, see our sister site: Innacomm port forwarding guides on Portforward.com.

Innacomm Models We Cover

ADSL-MARITIME-W3400V6, RG4332