If you need to reset your Intelbras ACtion RF 1200 router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- Your WiFi name and password are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Intelbras ACtion RF 1200 Guides
This is the reset router guide for the Intelbras ACtion RF 1200 1.1.3 (ES). We also have the following guides for the same router:
Recover Password in Intelbras ACtion RF 1200
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Intelbras ACtion RF 1200
On most routers you can find a small button on the back or the bottom labeled reset. This is what a typical reset button looks like:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will erase everything you have previously done to this Intelbras ACtion RF 1200 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Intelbras ACtion RF 1200
Now you need to log in using the factory default username and password. You can find all of the information that you need in our ACtion RF 1200 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Intelbras ACtion RF 1200 Guides
This isn't our only Intelbras ACtion RF 1200 guide. We also have the following guides for this router.
This is the reset router guide for the Intelbras ACtion RF 1200 1.1.3 (ES). We also have the following guides for the same router: