This guide shows you how to reset your Inteno DG200AL router. Resetting a router is different than rebooting a router. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Inteno DG200AL Guides
This is the reset router guide for the Inteno DG200AL. We also have the following guides for the same router:
Recover Password in Inteno DG200AL
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Inteno DG200AL
Usually there is a reset button located on the back or bottom of a router. This is what a typical reset button looks like:
Your reset button may look different, but usually they are very small. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Inteno DG200AL router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Inteno DG200AL
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our DG200AL Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other Inteno DG200AL Guides
If you want additional help with your Inteno DG200AL be sure to check out some of our other guides.
This is the reset router guide for the Inteno DG200AL. We also have the following guides for the same router: