If you need to reset your Inteno DG200B router back to factory settings, then this article shows you how. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:
- The router's login and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Inteno DG200B Guides
This is the reset router guide for the Inteno DG200B DG200-WU7P2U_newNGT3.16.4-190307_1746 NextGenTel. We also have the following guides for the same router:
Recover Password in Inteno DG200B
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Inteno DG200B
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. You may need a paper clip to push the reset button.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will erase everything you have previously done to this Inteno DG200B router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Inteno DG200B
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a DG200B Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Inteno DG200B Guides
Here are some of our other Inteno DG200B guides that you might be interested in.
This is the reset router guide for the Inteno DG200B DG200-WU7P2U_newNGT3.16.4-190307_1746 NextGenTel. We also have the following guides for the same router: