IOGear Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
October 24, 2022 (Last Updated: ) | Reading Time: About 1 minute

We have one IOGear model in our database, the GNS1000200. It uses 192.168.1.1 as the default IP address. Its default settings are below.

How to Log In to the IOGear GNS1000200

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://192.168.1.1 into your browser's address bar. If nothing loads, see How To Find Your Router's IP Address.
  3. Sign in with the default username and password from the table below.

Default IOGear IP Address

IOGear Model IP Address
GNS1000200 192.168.1.1

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on an IOGear router, see our sister site: IOGear port forwarding guides on Portforward.com.