Setup Router logo in white Setup router name logo in white
Get Software

Reset the Iskratel Sinope568 R4

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Iskratel Sinope568 R4 router. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.

Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:

  • The router's username and password are reset.
  • Your WiFi name and password are reset.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Iskratel Sinope568 R4 Guides

This is the reset router guide for the Iskratel Sinope568 R4. We also have the following guides for the same router:

Recover Password in Iskratel Sinope568 R4

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Iskratel Sinope568 R4

Most of the time you can find a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.

Remember, this will erase everything you have previously done to this Iskratel Sinope568 R4 router.

Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Iskratel Sinope568 R4

Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our Sinope568 R4 Login Guide.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Iskratel Sinope568 R4 Guides

This isn't our only Iskratel Sinope568 R4 guide. We also have the following guides for this router.

This is the reset router guide for the Iskratel Sinope568 R4. We also have the following guides for the same router: