How to Reset the Jensen Scandinavia AirLink 10006

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you tried to login to the Jensen-Scandinavia AirLink-10006 router and been unsuccessful? It might be time to consider a factory reset. A factory reset is not the same thing as a reboot. When you reboot a router you cycle the power to the unit. When you reset a router you take all the settings that have ever been changed and revert them to factory defaults.

Warning: Resetting the router is a big step and needs to be taken seriously. We highly recommend that you create a list of all possible settings you have changed in the past such as:

  • The router's main username and password.
  • The network SSID and password.
  • If this is a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • Have you made other changes to this device? How about port forwards or IP address changes? Write these down as well.

Other Jensen Scandinavia AirLink 10006 Guides

This is the reset router guide for the Jensen Scandinavia AirLink 10006. We also have the following guides for the same router:

Reset the Jensen Scandinavia AirLink 10006

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Unfortunately I am unable to show you an image of where the reset button is located. Normally a reset button looks less like a reset button and more like a small pinhole on the outside of the device.

The first thing to do once you find the reset "button" is to make sure the router is on. Then take a small sharp object such as a straightened paperclip and press down on the reset button for about 10 seconds. This will begin the reset process. If you don't hold the reset button down for long enough you might end up only rebooting the device instead.

Warning: Do not unplug or turn off the device during the reset process. Doing so could cause permanent damage to the unit.

Don't forget that this reset is erasing every personal setting you have ever made to the device. Please consider other options before you decide to reset the Jensen-Scandinavia AirLink-10006 router.

Login to the Jensen Scandinavia AirLink 10006

Once the reset is complete you need to login to the Jensen-Scandinavia AirLink-10006 router using the appropriate default IP address, username and password. Check out our Login Guide for the Jensen-Scandinavia AirLink-10006 router.

Tip: Did the defaults not work? It might be that you didn't hold the reset button down for long enough.

Change Your Password

After the login is complete you need to change the default password for the router. This password is protecting the router settings not the Internet access. Nevertheless this password should be strong. Check out our Choosing a Strong Password guide to help you.

Tip: If you want to avoid losing this password you should try writing it down on a slip of paper and taping it to the bottom of the router.

Setup WiFi on the Jensen-Scandinavia AirLink-10006

It is now time to reconfigure the Jensen-Scandinavia AirLink-10006 router. This may include many settings or simply the WiFi settings. For an easy to follow WiFi guide check out our Jensen-Scandinavia AirLink-10006 WiFi Instructions.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Jensen Scandinavia AirLink 10006 Help

Be sure to check out our other Jensen Scandinavia AirLink 10006 info that you might be interested in.

This is the reset router guide for the Jensen Scandinavia AirLink 10006. We also have the following guides for the same router: