Setup Router logo in white Setup router name logo in white
Get Software

Reset the Jensen Scandinavia AirLink 89300

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

If you need to reset your Jensen Scandinavia AirLink 89300 router back to factory settings, then this article shows you how. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Jensen Scandinavia AirLink 89300 Guides

This is the reset router guide for the Jensen Scandinavia AirLink 89300. We also have the following guides for the same router:

Recover Password in Jensen Scandinavia AirLink 89300

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Jensen Scandinavia AirLink 89300

There is usually a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your Jensen Scandinavia AirLink 89300 router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Jensen Scandinavia AirLink 89300

Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our AirLink 89300 Login Guide.

Change Your Password

Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Jensen Scandinavia AirLink 89300 Guides

If you want additional help with your Jensen Scandinavia AirLink 89300 be sure to check out some of our other guides.

This is the reset router guide for the Jensen Scandinavia AirLink 89300. We also have the following guides for the same router: