This guide shows you how to reset your Jensen Scandinavia Eagle 1000 router. A router reset is very different than a router reboot. A reboot happens every time a router loses power. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Jensen Scandinavia Eagle 1000 Guides
This is the reset router guide for the Jensen Scandinavia Eagle 1000 1.10. We also have the following guides for the same router:
Recover Password in Jensen Scandinavia Eagle 1000
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Jensen Scandinavia Eagle 1000
On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Keep in mind that this will completely reset your Jensen Scandinavia Eagle 1000 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Jensen Scandinavia Eagle 1000
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the Eagle 1000 Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Jensen Scandinavia Eagle 1000 Guides
Here are some of our other Jensen Scandinavia Eagle 1000 guides that you might be interested in.
This is the reset router guide for the Jensen Scandinavia Eagle 1000 1.10. We also have the following guides for the same router: