This is the reset guide for the KAON Media CG2200 router. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.
Warning: This is not a step to be taken lightly. The following settings will be changed in your router:
- The router's username and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other KAON Media CG2200 Guides
This is the reset router guide for the KAON Media CG2200 1.1.3 (ES). We also have the following guides for the same router:
- KAON Media CG2200 1.0.0 - Login to the KAON Media CG2200
- KAON Media CG2200 1.0.0 - Information About the KAON Media CG2200 Router
- KAON Media CG2200 1.0.0 - Reset the KAON Media CG2200
Recover Password in KAON Media CG2200
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the KAON Media CG2200
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this KAON Media CG2200 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the KAON Media CG2200
Once the reset is complete, you need to login to your router using the default IP address, username, and password. We have a CG2200 Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other KAON Media CG2200 Guides
Here are some of our other KAON Media CG2200 guides that you might be interested in.
This is the reset router guide for the KAON Media CG2200 1.1.3 (ES). We also have the following guides for the same router:
- KAON Media CG2200 1.0.0 - Login to the KAON Media CG2200
- KAON Media CG2200 1.0.0 - Information About the KAON Media CG2200 Router
- KAON Media CG2200 1.0.0 - Reset the KAON Media CG2200