This article covers how to reset the KAON Media CG3000 router back to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login and password are reset to factory defaults.
- All WiFi login information and network names are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other KAON Media CG3000 Guides
This is the reset router guide for the KAON Media CG3000 1.01.19. We also have the following guides for the same router:
Recover Password in KAON Media CG3000
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the KAON Media CG3000
Usually there is a reset button located on the back or bottom of a router. Look at your router and try to find something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this KAON Media CG3000 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the KAON Media CG3000
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can follow the CG3000 Login Guide to find everything that you need to log in.
Change Your Password
Do not forget to change your router's default password when you log back into it. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other KAON Media CG3000 Guides
This isn't our only KAON Media CG3000 guide. We also have the following guides for this router.
This is the reset router guide for the KAON Media CG3000 1.01.19. We also have the following guides for the same router: