This guide shows you how to reset your Linksys E4200V2 Smart Wi-Fi router to factory default settings. This is a much bigger deal than a router reboot. A reboot happens every time a router loses power. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login and password are reset.
- All WiFi settings are reset, including network name and password.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Linksys E4200V2 Smart Wi-Fi Guides
This is the reset router guide for the Linksys E4200V2 Smart Wi-Fi 2.1.42.183584. We also have the following guides for the same router:
Recover Password in Linksys E4200V2 Smart Wi-Fi
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Linksys E4200V2 Smart Wi-Fi
There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this Linksys E4200V2 Smart Wi-Fi router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Linksys E4200V2 Smart Wi-Fi
Once the reset is complete, you need to login to your router using the default IP address, username, and password. You can find all of the information that you need in our E4200V2 Smart Wi-Fi Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Linksys E4200V2 Smart Wi-Fi Guides
This isn't our only Linksys E4200V2 Smart Wi-Fi guide. We also have the following guides for this router.
This is the reset router guide for the Linksys E4200V2 Smart Wi-Fi 2.1.42.183584. We also have the following guides for the same router: