How to change the IP Address on a Linksys RVS4000 router

This page shows how to change the LAN IP Address on the Linksys RVS4000 router.

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the ip address guide for the Linksys RVS4000. We also have the following guides for the same router:

Linksys RVS4000 - Linksys RVS4000 User Manual

Linksys RVS4000 - Linksys RVS4000 Login Instructions

Linksys RVS4000 - How to change the DNS settings on a Linksys RVS4000 router

Linksys RVS4000 - How to Reset the Linksys RVS4000

Linksys RVS4000 - Information About the Linksys RVS4000 Router

Linksys RVS4000 - Linksys RVS4000 Screenshots

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

192.168.0.1
192.168.1.1
10.0.0.1

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys RVS4000

To get started configuring the Linksys RVS4000 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys RVS4000, follow our Linksys RVS4000 Login Guide.

Change the LAN IP Address on a Linksys RVS4000

If you followed our login guide above then you should see this screen.

router status mac address internet IP — This is the *status* page from your Linksys RVS4000 router.

Once you have successfully logged into the Linksys RVS4000 you begin on the Setup/Summary page. To change your IP Address, the address you see while inside your network, click the choice of LAN, this is in small lettering underneath the black bar.

Configure the LAN section of your Linksys RVS4000

router setup — This is the *setup* page from your Linksys RVS4000 router.

Next, scroll down this page until you come to four boxes labeled Local IP Address, it is near the top of the page. Enter your new IP Address you have chosen for your Router. We suggest using the address that is in these screenshots, 192.168.1.1

Do not change the Subnet Mask, this should normally stay at 255.255.255.0 The DHCP Server should also be left enabled, this allows your Router to choose these numbers for you.

After you have finished making changes to your Router, be sure to save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.