How to change the IP Address on a Linksys SRW248G4 router

This page shows how to change the LAN IP Address on the Linksys SRW248G4 router.

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

192.168.0.1
192.168.1.1
10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys SRW248G4

To get started configuring the Linksys SRW248G4 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys SRW248G4, follow our Linksys SRW248G4 Login Guide.

Change the LAN IP Address on a Linksys SRW248G4

If you followed our login guide above then you should see this screen.

router status mac address internet IP — This is the *status* page from your Linksys SRW248G4 router.

Now that you have logged into the Linksys SRW248G4 you begin on the System Description page. First, click the tab at the top of the page labeled IP Settings.

Configure the LAN section of your Linksys SRW248G4

router setup — This is the *setup* page from your Linksys SRW248G4 router.

Next, click the box marked IP Address, this is the address you can see while inside your network. Enter your new address you have chosen for your Router here. In these screenshots the address of 192.168.1.254 is used, this is a good address. We suggest using this address also.

Please don't change the Subnet Mask, it must be kept at 255.255.255.0 at all times.

When you've finished making changes, click Submit.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.