How to change the IP Address on a Linksys WRT110 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Linksys WRT110 router.

Other Linksys WRT110 Guides

This is the ip address guide for the Linksys WRT110 v1.0.05. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys WRT110

To get started configuring the Linksys WRT110 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WRT110, follow our Linksys WRT110 Login Guide.

Change the LAN IP Address on a Linksys WRT110

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Linksys WRT110 router.

After you have logged into the Linksys WRT110v1.0.05, the first page you are on is called the Basic Setup page. This is the correct page to change your IP Address, the address from inside your network.

Configure the LAN section of your Linksys WRT110

router setup
This is the setup page from your Linksys WRT110 router.

Scroll down this page until you come to four boxes labeled IP Address. Place your cursor in the first box, and enter the new address you have chosen for your Router. Our suggestion is to use the address of 192.168.0.1

Before exiting, make sure you have not changed the Subnet Mask, this should always remain at 255.255.255.0 The DHCP Server should also be left enabled.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Linksys WRT110 Info

Don't forget about our other Linksys WRT110 info that you might be interested in.

This is the ip address guide for the Linksys WRT110 v1.0.05. We also have the following guides for the same router: