How to change the IP Address on a Linksys WRT54GL router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 4 minutes

This page shows how to change the LAN IP Address on the Linksys WRT54GL router.

Other Linksys WRT54GL Guides

This is the ip address guide for the Linksys WRT54GL v4.30. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys WRT54GL

To get started configuring the Linksys WRT54GL LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WRT54GL, follow our Linksys WRT54GL Login Guide.

Change the LAN IP Address on a Linksys WRT54GL

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Linksys WRT54GL router.

After logging into the Linksys WRT54GL v4.30 you see the Basic Setup page. This is the correct page to be on when changing your IP Address, the address you see when inside your network.

Configure the LAN section of your Linksys WRT54GL

router setup
This is the setup page from your Linksys WRT54GL router.

First, find the heading, on the left, labeled Network Setup. Then, in the center section of the screen you see four boxes labeled Local IP Address. Enter your new IP Address you have picked out for your Router. Our suggestion would be 192.168.1.1 Don't change the Subnet Mask, this needs to remain at 255.255.255.0 The DHCP Server should likewise remain enabled, this allows your Router to choose these addresses for you.

Before exiting, save your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Linksys WRT54GL Info

Don't forget about our other Linksys WRT54GL info that you might be interested in.

This is the ip address guide for the Linksys WRT54GL v4.30. We also have the following guides for the same router: