How to change the IP Address on a Linksys WRT54GP2A-AT router

This page shows how to change the LAN IP Address on the Linksys WRT54GP2A-AT router.

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the ip address guide for the Linksys WRT54GP2A-AT. We also have the following guides for the same router:

Linksys WRT54GP2A-AT - Linksys WRT54GP2A-AT User Manual

Linksys WRT54GP2A-AT - Linksys WRT54GP2A-AT Login Instructions

Linksys WRT54GP2A-AT - How to change the DNS settings on a Linksys WRT54GP2A-AT router

Linksys WRT54GP2A-AT - Setup WiFi on the Linksys WRT54GP2A-AT

Linksys WRT54GP2A-AT - How to Reset the Linksys WRT54GP2A-AT

Linksys WRT54GP2A-AT - Information About the Linksys WRT54GP2A-AT Router

Linksys WRT54GP2A-AT - Linksys WRT54GP2A-AT Screenshots

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

192.168.0.1
192.168.1.1
10.0.0.1

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys WRT54GP2A-AT

To get started configuring the Linksys WRT54GP2A-AT LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WRT54GP2A-AT, follow our Linksys WRT54GP2A-AT Login Guide.

Change the LAN IP Address on a Linksys WRT54GP2A-AT

If you followed our login guide above then you should see this screen.

router setup — This is the *setup* page from your Linksys WRT54GP2A-AT router.

Now that you have logged into the Linksys WRT54GP2A-AT you should begin on the Basic Setup page. This is the only page you need when changing your IP Address, the address you see while inside your network.

Configure the LAN section of your Linksys WRT54GP2A-AT

First, scroll down this page until you come to the heading of Network Setup, it is on the left. In the main section of the screen there are four boxes labeled Local IP Address. This is where you need to enter your new IP Address you have chosen for your Router. Our suggestion is to use the address of 192.168.0.1 The Subnet Mask should usually be left at 255.255.255.0

Before exiting, make sure and save any changes you've made.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.