Linksys WRV200 Login Instructions

Here are instructions for logging in to the Linksys WRV200 router.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WRV200. We also have the following guides for the same router:

Linksys WRV200 - How to change the IP Address on a Linksys WRV200 router

Linksys WRV200 - Linksys WRV200 User Manual

Linksys WRV200 - How to change the DNS settings on a Linksys WRV200 router

Linksys WRV200 - Setup WiFi on the Linksys WRV200

Linksys WRV200 - Information About the Linksys WRV200 Router

Linksys WRV200 - Linksys WRV200 Screenshots

Linksys WRV200 - Reset the Linksys WRV200

Find Your Linksys WRV200 Router IP Address

Before you can log in to your Linksys WRV200 router, you need to figure out it's internal IP address.

Known WRV200 IP Addresses
192.168.1.1

Start with the first IP address in the list and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then try the following:

Use our Find Your Router's Internal IP Address guide.
Use our free Router Detector software.

The next step is to try logging in to your router.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WRV200 Router

Your Linksys WRV200 is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Linksys WRV200 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. The address bar looks like this:

Press the Enter key on your keyboard. You will see a window asking for your Linksys WRV200 password.

Linksys WRV200 Default Username and Password

You must know your Linksys WRV200 username and password in order to log in. It's possible that the router's password is still set to the factory default. All of the default usernames and passwords for the Linksys WRV200 are listed below.

Linksys WRV200 Default Usernames and Passwords
Username	Password
admin	admin

Enter your username and password in the window that pops up. Keep trying them all until you get logged in.

Linksys WRV200 login screen

Linksys WRV200 Home Screen

After you get logged in you should see the Linksys WRV200 home screen, which looks like this:

router status mac address internet IP — This is the *status* page from your Linksys WRV200 router.

If you see this screen, then good job, you are now logged in to your Linksys WRV200 router. You are now ready to follow one of our other guides.

Solutions To Linksys WRV200 Login Problems

If you cannot get logged in to your router, here a few possible solutions you can try.

Linksys WRV200 Password Doesn't Work

Your router's factory default password might be different than what we have listed here. It doesn't hurt to try all of the other known Linksys passwords. Head over to our list of all Linksys Passwords.

Forgot Password to Linksys WRV200 Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the Linksys WRV200 Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. You can follow our How To Reset your Router guide for help.