Loopcomm Router Login and Default Password

Thumbnail image of Setup Router Staff
Setup Router Staff
October 27, 2022 (Last Updated: ) | Reading Time: 1 minutes

We have 4 Loopcomm models in our database: the LP-8186, LP-AL2011, LP-AL2014P and LP-AL5011P. Most of them use 10.0.0.2 as the default IP address, and the default login is admin / 1234. This page has the default IP address and login for each model we know of.

How to Log In to a Loopcomm Router

  1. Connect a computer or phone to the router, with a network cable or over WiFi.
  2. Type http://10.0.0.2 into your browser's address bar. If nothing loads, try the other addresses in the table below.
  3. Sign in with the default username and password from the table below (admin / 1234 is the most common).

Default Loopcomm IP Addresses

Loopcomm Model IP Address
LP-8186 192.168.1.254
LP-AL2011 10.0.0.2
LP-AL2014P 10.0.0.2
LP-AL5011P 10.0.0.2

Default Loopcomm Username and Password

Loopcomm Model Username Password
LP-8186 admin 1234
LP-AL2011 admin epicrouter
LP-AL2014P user password
LP-AL5011P root root

Other logins we have seen on Loopcomm models: admin / epicrouter, root / root.

If the Default Login Doesn't Work

Someone has probably changed the password. Check the label on the router, then factory reset it: with the router on, hold the Reset button (often a pinhole, so use a paperclip) for about 10 to 30 seconds, then let go. That puts back the default login above, and also erases your WiFi and Internet settings. See How To Reset Your Router.

More Than Router Guides

To forward ports on a Loopcomm router, see our sister site: Loopcomm port forwarding guides on Portforward.com.

Loopcomm Models We Cover

LP-8186, LP-AL2011, LP-AL2014P, LP-AL5011P